Categories
I’m getting “An operating system specific kernel-level driver for the specified card could not be found.”
This error shown below can occur if the data acquisition (DAQ) or Quanser device (e.g., Qube-Servo) is not connected to the computer or not powered on.
Make sure the Quanser device (e.g., Qube-Servo) or DAQ is connected to the computer. If using a system such as the Qube-Servo 3, Aero 2, and QArm, also make sure they are powered ON.
Go to Windows Device Manager to verify if the DAQ or Quanser device is being detected. The examples below show how the Q2-USB and QUBE-Servo 2 USB devices would show up detected.
Make sure the Quanser device (e.g., Qube-Servo) or DAQ is connected to the computer. If using a system such as the Qube-Servo 3, Aero 2, and QArm, also make sure they are powered ON.
Go to Windows Device Manager to verify if the DAQ or Quanser device is being detected. The examples below show how the Q2-USB and QUBE-Servo 2 USB devices would show up detected.
Technical Support
For over 20 years, Quanser has put as much emphasis on fostering and building our relationships with customers as on developing the best functional solutions.